Printing is on!

My ultimaker is on an endurance test, it is running for 16h nonstop.
I was waiting for quite some time for the printer, so i had plenty of things to print.

this are two hlafs of a rudder

it is basically the same as the one on fila, two or three thick layers of 2k paint will be needed to cover the steps from printing

this print will be used as a rudder on fila, the next print will serve as a positive for moulds

For future F5g boats such as evolution, cardio etc. a new bulb will be introduced

this is the printed positive, painting is required before a mould can be made, it took the printer 4h to print this

the expected weight is 700g, it is 22cm long and has a max thickness of 12% at 40% of chord

this is the first sold print, it is a gimbal mounting plate, for my friends hexacopter

The last print for today is a keychain for my girlfriend, after that the printer will get a well deserved rest. :)

If anyone is interested in prints: http://www.3dhubs.com/maribor/hubs/erik

IMO the prices are fair, much cheaper than other guys..