But the project is making some progress:
|this finnbox is made of 1x80g carbon, 1mm balsa and 1x80g carbon + 1x25g glass sandwich|
|this is the switch/battery/reciever lid, the yellow thing is the thread, the hole on the red lid itself will be covered by a patch to save weight|
|this is the 1gram rudder mount|
|this is the current state of the hull, the finnbox is aligned, the pen will be replaced by an aluminum tube, glued in at a 5 degree rake, this will be the fixed mast rake for this boat.|
Tommorow's plan is to make the sheeting servo mount(it will be mounted behind the finnbox laying down), the radiogear tray and glue on the deck, the mast tube will be glued afterwards.